If you enable power management, you can use this item below to set the power management operation. You can install this motherboard in an ATX case. Push down the latches on both sides of the DIMM socket. Do not touch those components unless it is absolutely necessary. Answered on Sep 02, If you are adding an infrared port, connect the ribbon cable from the port to the IR1 header and then secure the port to an appropriate place in your system chassis. The default PCI setting still lets the onboard display work and allows the use of a second display card installed in an AGP slot.

Uploader: Taurr
Date Added: 19 June 2010
File Size: 21.29 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 87346
Price: Free* [*Free Regsitration Required]

Fasten the cooling fan supporting base onto the CPU socket on the motherboard. Install the device s and connect power from the system power supply. If you enable power management, you can use this item below to set the power management operation. Hardware specifications and software items are subject to change without notification. It has been acknowledged that other brands or product names in this manual are trademarks or the properties of their respective owners.

On the motherboard, locate the 4-pin header CD1. Additionally, some computer cases have USB ports at the front of the case. The system will automatically detect the type of installed CPU and make the appropriate adjustments to the items on this page.


If not, Not Cuips displays.

Put the floppy disk to tray. You might need to do this to configure some hardware installed in or connected to the motherboard, such as the CPU, system memory, disk drives, etc. Align the memory module with the socket.

OnBoard IR Port Use this item to enable or disable the onboard infrared port, and to assign a port address.

PC Chips P21G

Holding down the Page Up key also clears the chipss information. Secure the extension bracket to the chassis with a screw. Answered on Jan 20, Install 2p1g extension bracket in the opening. Try Other Boot Device If you enable this item, the system will also search for other boot devices if it fails to find an operating system from the first two locations.

Power Management Setup Page This page sets some parameters for system power management operation. The Auto setting will detect and available address. Inspect this motherboard whether there are any damages to components and connectors on the board.

Bios Chip for PC Chips P21G motherboard

The Master device connects to the end of the cable. Power Management Use this item to enable or disable a power management scheme. See this chapter for information about locating JP3 and the setting options. Press F1 to display a screen describing all key functions. It is recommended that you leave this item at the default value. Let me know how you made out with this issue, thanks for using fixya. Package Contents Your motherboard package ships with the following items: If there is a cooling fan installed in the system chassis, connect the cable from the cooling fan to the SYSFAN1 fan power connector on the motherboard.


Therefore, it might happen under Windows XP that a dialogue box shown as below pop out warning you this software has not passed Windows Logo testing to verify its compatibility with Windows XP.

Static Electricity Precautions 1. Use this item to enable or disable the ACPI feature.

The fan connector supports the CPU cooling fan of 1. Key Features The key features of this motherboard include: The support CD-ROM contains all useful p21, necessary drivers and utility programs to properly run our products. You set this value to No to free up an IRQ.